Skip to content

Posts from the ‘Jewelry Cabinet’ Category

Pushing to the finish

November 9, 2012



Gluing in the back of the cabinet.  I cut a piece of plywood to rest on the rabbets of the door opening so that I had a good surface to clamp against and no chance of marring the finished case.


After the back panel glue up was try and un-clamped, I did some final surface with the smooth plane and mortised for the brass key hole hangers.

Small drawers, big work

October 22, 2012


Spent a couple hours dovetailing these small drawers for the jewelry cabinet.  Despite their small size, they are a lot of work, but the fit is sweet!